SDS

Artisan Efflorescence Remover
9/5/13
Page 3 of 5
Section 7. Handling and Storage
Precautions for safe handling: Prevent eye contact. Avoid prolonged skin contact. Do not breathe spray
mists. Use with adequate ventilation. Use only with appropriate protective equipment. Immediately remove
and launder contaminated clothing before re-use. Wash thoroughly after handling and before eating, drinking,
smoking or using toilet facilities. Keep out reach of children.
Empty containers retain product residues. Follow all SDS precautions in handling empty containers.
Conditions for safe storage, including any incompatibilities. Store in a cool, well-ventilated area away from
oxidizing agents and other incompatible materials. Store in fiberglass, polyethylene or polypropylene
containers. Do not store in metal containers. Protect from physical damage.
Section 8. Exposure Controls / Personal Protection
Exposure guidelines:
Organic Acid Salt
None Established
Surfactant Blend
None Established
Appropriate engineering controls: For operations where exposures are excessive mechanical ventilation such
as local exhaust may be required.
Individual protection measures, such as personal protective equipment:
Respiratory protection: None needed under normal use conditions with adequate ventilation. For spray
application, use a NIOSH approved dust/mist respirator with appropriate eye protection. A full facepiece
respirator provides both eye and respiratory protection. For higher concentrations an approved supplied air
respirator (with escape bottle if required) or self-contained breathing apparatus may be required. Selection of
respiratory protection depends on the contaminant type, form and concentration. Select in accordance with
OSHA 1910.134 and good Industrial Hygiene practice.
Skin protection: Nitrile or other impervious gloves are recommended to avoid skin contact.
Eye protection: Chemical safety goggles and face shield required.
Other: For operations where contact can occur, a safety shower and an eye wash facility should be available.
Section 9. Physical and Chemical Properties
Appearance: Clear, amber liquid
Odor: Mild odor.
Odor threshold: Not available
pH: 1
Melting point/freezing point: 32°F (0°C)
Initial boiling point and boiling range: 212°F (100°C)
Flash point: Not flammable
Evaporation rate: Same as water
Flammability (solid, gas): Not applicable
Flammable limits: LEL: Not applicable
UEL: Not applicable
Vapor pressure: Same as water
Vapor density: Same as water
Relative density: 1.15
Solubility(ies): Completely Soluble
Partition coefficient: n-octanol/water: Not
available
Auto-ignition temperature: Not applicable
Decomposition temperature: Not available
VOC: 0 g/L