MSDS

Artisan Penetrating Water Repellent
Safety Data Sheet
Page 1 of 5
Section 1. Identification
Product Name: Artisan Penetrating Water Repellent
Product Code:
Recommended use: Water repellent for masonry surfaces
Restrictions on use: Use only as directed
Manufacturer Name:
Address:
Telephone number:
Chemique, Inc.
315 N. Washington Avenue
Moorestown, NJ 08057
(856) 235-4161
Emergency phone number: (800) 535-5053 (Infotrac)
Date of Preparation: December 10, 2013
Section 2. Hazard(s) Identification
Note: This product is a consumer product and is labeled in accordance with the US Consumer Product Safety
Commission regulations which take precedence over OSHA Hazard Communication labeling. The actual
container label will not include the label elements below. The labeling below applies to industrial/professional
products.
Classification: Not classified as hazardous
Label Elements:
Not Hazardous in accordance with the Globally Harmonized System for the Classification and Labeling of
Chemicals (GHS)
Section 3. Composition / Information on Ingredients
Chemical name
CAS No.
Concentration
Silicone Emulsion
Mixture
10-30%
The specific identity and/or exact percentage (concentration) of composition has been withheld as a trade
secret.
Section 4. First-Aid Measures
Inhalation: Remove victim to fresh air. If irritation occurs or breathing is difficult, get medical attention.
Skin contact: Wash with soap and water. If irritation develops and persists, get medical attention.
Eye contact: Flush eyes with water while lifting the upper and lower lids. Get medical attention if irritation
develops or persists.
Ingestion: Rinse mouth with water. Do not induce vomiting unless directed to do so by medical personnel.
Never give anything by mouth to a person who is unconscious or convulsing. Get medical attention.

Summary of content (5 pages)