Cut Out Dimensions

NOTE
u
: ALL POWER SUPPLIES SHOWN ARE 115 VAC - 1Ø - 60 Hz.
NOTE
v
: POWER REQUIREMENTS FOR ARTP-32 AND ARTP-36 INCLUDE
LIGHTAND ROTISSERIE POWER TOGETHER.
AAEP BBQ'S USE
9 VDC INGNITION AND DO NOT HAVE LIGHTS.
NOTE
w
: ALL GAS LINES REQUIREMENTS ARE AS FOLLOWS:
NG: 1/2" NPT WITH 5" W.C.
LP: 3/8" ODF WITH 10" W.C.
NOTE
x
: INSULATED JACKETS ARTIJ-26 / 32 / 36 DO NOT REQUIRE POWER
AND/OR GAS LINES BY THEMSELVES. ONLY THE GRILLS THEY ARE
MEANT TO INSULATE REQUIRE THEM.
NOTE
y
: ART-SB1 GAS LINE IS 3/8" OD CONNECTED TO THE EXISTING GRILL
WITH SUPPLIED GAS FITTINGS.
MODEL
CUTOUT DIMENSIONS NOTCH
SETBACKS
POWER
u
GAS
LINE
W D H N
S1(MIN.) S2
AMPS
AAEP-26 24-1/2" 19-3/4" 9-1/2" 7/8"
5-3/4" ~
w
ARTP-32 / AAEP-32 30-1/2" 19-3/4" 9-1/2" 7/8"
5-3/4" ~
0.71
v
w
ARTP-36 34-1/2" 19-3/4" 9-1/2" 7/8"
5-3/4" ~
0.71
v
w
ARTIJ-26 27-1/4" 23-5/8" 10-1/4" 7/8"
1-5/8" ~
x
ARTIJ-32 33-1/4" 23-5/8" 10-1/4" 7/8"
1-5/8" ~
x x
ARTIJ-36 37-1/4" 23-5/8" 10-1/4" 7/8"
1-5/8" ~
x x
ART-SB1 11" 15" ~ ~
1-1/2" ~
y
ARTP-SDL /SDR 13-7/8" ~ 18-1/2" ~
~ ~
ARTP-DD 27-1/4" ~ 18-1/2" ~
~ ~
ARTP-DDC 29-3/8" 18-5/8" 18-1/2" ~
~ ~
ARTP-2DR 14-5/8" 18-5/8" 12-1/2" ~
~ ~
ARTP-TC 12-1/2" 18-1/2" 26-1/2" ~
~ ~
ARTP-PWC 6-1/4" 8-1/4" ~ ~
~ 4-5/8"
H
N
W
D
D
S2
W
W
H
S1
S1
D
SIDE BURNER &
TRASH CHUTE
UNDERCOUNTER
OUTLET REQUIRED
FOR GRILL LIGHTS
ON ARTP GRILLS
COUNTERTOP OUTLET REQUIRED
FOR POWER TO ROTISSERIE UNITS
ART-ROT26 OR 32
POWER: 115 VAC - 0.38AMPS
GRILLS &
INSULATED
JACKETS
MEASURED TO
CABINET FACE
DOORS,
DRAWERS
&
TRASH
CENTER