Specification Sheet

ARTP-SB2 UNIT
14"
26 1/4"
20 13/16"
11 9/16"
SHOWN WITHOUT COVER
14"
12 3/8"
1 3/16"
10"
FRONT VIEW
21 13/16"
23 1/4"
3"
3/4"
1"
9 1/4" 4 15/16"
1 1/8"
COVER
ELECTRICAL
CORD 8 FT.
NEMA 5-15
90° PLUG
GAS LINE
INLET
REGULATOR
2 1/4"
4 3/8"
11 7/8"
REAR VIEW
GAS LINE
INLET
12 3/8"
9 1/4"
22 3/8"
~ 4 1/4"
NOTE: ELECTRICAL POWER IS
REQUIRED UNDER THE COUNTER
(GFCI RECOMMENDED)
BULLNOSE DETAIL
14 1/8"
7/8" 7/8"
SETBACK EQUAL
TO THE COUNTER
BULLNOSE DEPTH
TYPICAL ARTP-SB2 INSTALLATION
NOTE: A GAS LINE IS REQUIRED INSIDE THE COUNTER FOR
OPERATION. (FOR LP-GAS SETUP SEE NOTE AT RIGHT).
IT IS RECOMMENDED THAT A FLEXIBLE HOSE IS USED FOR
NG-GAS SETUPS TO EASE INSTALLATIONS.
COUNTERTOP CUTOUT REQUIREMENTS
SPECIFICATIONS:
BTUH = 30,000
FUEL = NG @ 5' W.C. OR LP @ 10" W.C.
ELECTRICAL POWER = 115 VAC
GAS CONNECTION = 1/2" NPT (NG) OR 3/8" ODF (LP)
ADAPTER:
1/2" MPT X 3/8" MPT
REGULATOR
WITH 36" HOSE
LP GAS
SETUP:
NOTE:
STANDARD UNIT HAS A NATURAL GAS (NG)
CONNECTION WITH 1/2" FPT FITTING.
IF LIQUID PROPANE (LP) OPTION IS ORDERED
THE UNIT IS SUPPLIED WITH A REGULATOR,
HOSE AND ADAPTER FITTING AS SHOWN.
SUPERIOR EQUIPMENT SOLUTIONS
1085 BIXBY DRIVE
CITY OF INDUSTRY, CA. 91745
DRAWING NO.: PROJECT TITLE:
DRAWING TITLE:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF SUPERIOR EQUIPMENT SOLUTIONS
INC. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT WRITTEN PERMISSION FROM SUPERIOR
EQUIPMENT SOLUTIONS, INC. IS PROHIBITED.
ARTP-SB2 SPEC SHEET
SHEET 1 OF 1
ARTP-SB2 SPECIFICATION SHEET
LAST SAVED BY: »» Adrian «« Thursday, September 13, 2018 10:02:01 AM
DRAWN BY: ADRIAN CRISCI
CREATED: 9/13/2018 8:23:05 AM
Artisan
SPEC SHEETS
TM