Owner`s manual
DIAGRAM
8
Attaching
the
LCRs
To
the
Towers
1.
Using the screws provided in the Tower Kit, attach the
LCRs
to the brackets on the tower
sideboards. When completed the back edge
of
the Tower Kit sideboard and the
LCR
back
edge should
be
flush with each other. Refer
to
Diagram
9
2. Make sure the screws are tightened enough
to
securely hold the speakers. Remember, the
center channels should
be
at the top and the left / right channels should
be
at the bottom.
(Refer to the
LCR
part
of
this manual.)
Diagram 9
Assembling
the
Top
Cap
to
the
Towers
1.
Position the top caps on their appropriate side. make sure they
fit
properly. There
are
two
pins
on
the top
cap
that
fit
into cups on the tops
of
the sideboard.
2.
Remove
the protective backing from the double backed tape on the bottom
of
the top
cap.
3. Place the top
cap
on the top
of
the Tower sideboard; make sure that the pins line up prop-
erly.
Press
down
CAREFULLY
on the top
cap
where
it
meets the Tower sideboard to adhere
the tape; this will permanently attach the top
cap
to the
Tower.
11