Owner`s manual
PORTRAIT
LCR
(Left,
Center,
Right)
Front
Channel
Speakers
Mounting
the
LCR
Speakers
1.
Locate
and
unpack the Television
Bracket
Hardware, which
is
in
the
Portrait
PG
LCR
Grille
Kit,
secured
within a cardboard shield.
2. Separate
the
packing;
be
very
careful not
to
lose any
of
the mounting hardware.
3.
Locate
the Televison Brackets.
These
are
pieces
of
heavy
gauge steel, which are bent into
a specific shape
so
that the speakers
will
mount
properly to your particular
display. Typical examples
of
Television Brackets
are
pictured
below.
ote: Brackets
do
not
all
look
exactly alike.
Diagram
1
4.
If
possible,
remove
the display from where
it
is mounted and
lay
it
face
down on a soft,
flat surface. This
can
be
a rug or carpeting
of
sufficient
size.
or a blanket, towel or other
padding.
Be
careful not
to
damage the glass or cosmetic surfaces. This will make the
installation
of
the television brackets
easier.
ote:
Some
installations allow the brackets
to
be
attached after the television
is
already installed.
5.
Some
display brands require four Television Brackets and some require
two.
Determine
which Brackets match your specific plasma. Using the supplied
screws
and washers.
attach the
two
(or four) Brackets
to
the
rear
of
the display. Refer to Diagram 2
•
Every
LCR
Speaker
System comes with
an
attached Main Bracket, which is used
to
attach the speakers
to
the
Speaker
Television Brackets. Additionally the main bracket
may
be
used
to
wall mount the system in
cases
where there
is
no
grill kit available for
a particular model television or
because
the customer prefers this type
of
installation.
3