Owner`s manual
Presence
Control
Settings
The Presence Control changes the center channel tweeter level
to
compensate for differing
room acoustics. This
can
be
adjusted with the three-position switch located in the Center
Channel terminal cup
on
the
back
of
each
LCR
speaker.
26. Adjusting the Presence Control
•
Normal
- the toggle is set towards the outside
of
the system, away from the display.
Start with the switches in this position first.
• Decreased - the toggle is in the center position. This setting
is
for acoustically "hard';
highly reflective rooms.
• Increased - the toggle
is
set towards the display. This setting
is
for acoustically "soft';
highly absorbent rooms.
Important:
Presence Control switches on both speakers should be set to
the
same positions
for
proper
balance
of
the
center image.
Nons:
1.
Every
LCR
Speaker
comes
with a Main
bracket
that
is
used
to
attach
the
speakers
to
the
display.
This bracket
may
also
be
used
to
wall mount the system when a Grille Kit is unavailable for
a particular display or
because
the customer would prefer wall mounting. There
are
Universal
Grille Kits available in
gray,
charcoal and black that will
fit
a 42'; 50:' or 60" display.
2.
Extra
screws
are
included with
each
kit in
case
any are lost.
It
takes 2 screws per side
to
secure the Televison Brackets and the Main Brackets together. The spare holes in the
Televison Brackets allow for different models
of
displays.
9