INSTALLATION GUIDE RCC320-R Retrofit Subwoofer Module RCC320-PC Pre-Construction Subwoofer Module
CARTON CONTENTS: RCC320-PC: 1. RCC320 Pre Construction Subwoofer Module 1. Grille 1. Paint Shield (Installed) 4. Paint Shield Mounting Screws (Installed) 4. L-Shaped Mounting Brackets 8. Mounting Bracket Screws 16. 3 mm (1/8”) Grille Spacers 8. Grille Spacer, Long Mounting Screws 1. Installation Guide RCC320-R: 1. 1. 1. 1.
Thank you for choosing Artison’s RCC320 Subwoofer Modules. We are pleased that you have selected our high-performance audio products. INTRODUCTION The following information will guide you through the installation and setup of your Artison RCC320 Retrofit Subwoofer Module or RCC320 Pre-Construction Subwoofer Module. The RCC320 and RCC640 series of architectural in wall subwoofers are were designed with a Reactance Cancelling Configuration, which allows vibration free operation.
RCC320 RETROFIT SUBWOOFER MODULE (RCC320-R) The RCC320-R was designed be installed into a 2 x 4 stud wall with a minimum of 16” on center spacing. The subwoofer module is not impacted by cabinet orientation and can be used either vertically or horizontally. The classical rule for subwoofer placement is that the subwoofer should be placed on the same wall the front channels are located, positioned at one-third of the total distance of the wall.
RCC320 PRE-CONSTRUCTION SUBWOOFER MODULE (RCC320-PC) The RCC320-PC was designed be installed into a 2 x 4 stud wall with a minimum of 16” on center spacing before the drywall is applied to the stud wall. The subwoofer is not impacted by cabinet orientation and can be used either vertically or horizontally. The classical rule for subwoofer placement is that the subwoofer should be placed near the same wall the front channels are located, at one-third of the total distance of the wall.
PAINTING THE GRILLE & TRIM RING 1. The Grille and Trim Ring can be painted separately from the rest of the subwoofer module. 2. Carefully remove the thin fabric scrim cloth from the interior of the grille. The scrim is not to be painted. Replace scrim cloth after painting is completely dry. If the scrim does not adhere to the grille again use a spray adhesive to reattach. 3. DO NOT get paint on the speaker baffle or speaker cones. Paint can damage these components which would VOID your Warranty.
LIMITED WARRANTY This warranty remains in effect for five years from the date of purchase for speaker products and one year for electronic products. THIS WARRANTY PROTECTS THE ORIGINAL OWNER PROVIDING THAT THE PRODUCT HAS BEEN PURCHASED FROM AN AUTHORIZED ARTISON DEALER IN THE UNITED STATES. THE ORIGINAL BILL OF SALE MUST BE PRESENTED WHENEVER WARRANTY SERVICE IS REQUIRED.