Car Speaker User Manual

RCC600-SA FRONT PANEL CONTROLS
GAIN – The position of this knob controls the overall gain (volume) of the subwoofer. Press
this button in and it will spring out into a rotating knob, press it back in to hide it. The front panel
gain control will become the master gain control until the remote is used. NOTE: The
amplifier by default will resume to the last setting by either gain control device.
DIM – This button controls the brightness of the Halo lighting on the front panel. There are
four brightness settings.
POWER – This button will toggle between Standby Mode (Amber Halo) and ON (Blue Halo).
MUSIC MODE – This preset EQ mode should be used for music playback. This EQ setting
provides a full range of musical bass to enhance the listening experience, when active it will
add a Red Halo to the Blue Halo.
MOVIE MODE – This preset EQ mode should be used for movie playback. This EQ setting
adds more volume and bass to help recreate the true movie theater experience, when active it
will add a Red Halo to the Blue Halo.
RCC600-SA REAR PANEL
AC POWER
1. The Power Switch is the hard ON/OFF power switch for the amplifier.
2. The Red Switch is the input voltage setting; select the appropriate 120V or 230V setting.
3. Connect the detachable IEC Power Cord underneath the Red Voltage Selection Switch.
8