Artistic Licence Engineering Catalogue, Printed in May 2015 Artistic Licence 1
Established in 1988, Artistic Licence is the industry expert in lighting control. We design products that control light in all its guises, from traditional sources to the latest ecofriendly technology, such as organic LED. Our range also covers test equipment and data distribution, and we are a major supplier of OEM solutions worldwide. For project work, our in-depth technological knowledge enables us to offer custom-build solutions where no off-the-shelf product would be suitable.
Rail-Split RDM II (A) DMX Splitters & Wireless DMX Features Specification Rail-Split RDM is a high specification, low cost DIN-Rail mounted DMX512 splitter designed for permanent installations. All connections are via screw terminals. DMX loop through and termination options are provided. Rail-Split RDM supports the RDM V1.0 (Remote Device Management) Standard, which allows bidirectional communication over the DMX cable.
Rail-Split extreme (A) DMX Splitters & Wireless DMX Features Specification DMX512 input and output protected against +/- 80V 12kV ESD protected DMX ports Slew rate limited drivers for improved signal quality Optically isolated DMX512 input Front panel power and data indication Six buffered outputs Bidirectional data ports Jabber Detection Fix Mode DIN Rail mounting Compatible with DMX512, DMX512 (1990), DMX512-A Protocols: RDM Standard V1.0 (E1.
versaSplit mini etha-5 versaSplit mini is a modular mains powered DMX512 and RDM distribution system. All outputs are ground referenced using robust drivers with advanced protection. The input is modular and the versaSplit mini ETHA-5 is fitted with the 10/100BaseT ethernet input module which provides an LCD user interface. The six output connectors are XLR5.
versaSplit mini x-5 versaSplit mini is a modular mains powered DMX512 and RDM distribution system. All outputs are ground referenced using robust drivers with advanced protection. The input is modular. The versaSplit mini x-5 is not fitted with an input module and must be ordered separately. Output connectors are XLR5.
versaSplit mini xlr5-5 versaSplit mini is a mains powered modular DMX512 and RDM distribution system with support for the RDM standard. All outputs are ground referenced using robust drivers with advanced protection. The input is modular and the versaSplit mini XLR5-5 is fitted with the XLR5 DMX512 / RDM split / fix module. The product is fitted with XLR5 output connectors.
versaSplit mono xlr5-5 versaSplit mono is a modular DMX512 and RDM distribution system with support for the RDM standard. All outputs are ground referenced using robust drivers with advanced protection. The input is modular and the versaSplit mono XLR5-5 is fitted with the XLR5 DMX512 / RDM split / fix module. This product configuration is also fitted with XLR5 output connectors. This product supersedes our popular Rack-Split RDM product.
versaSplit duo xlr5-5-xlr5 versaSplit duo is a modular DMX512 and RDM distribution system with support for the RDM standard. All outputs are ground referenced using robust drivers with advanced protection. The input is modular and the versaSplit duo xlr-5-xlr5 is fitted with two of the XLR5 DMX512 / RDM split / fix modules. This product configuration is also fitted with XLR5 output connectors.
versaSplit mono xlr8-8 versaSplit mono is a modular DMX512 and RDM distribution system with support for the RDM standard. The input is modular and the versaSplit mono XLR8-8 is fitted with the XLR8 DMX512 / RDM split / fix module. This product configuration is also fitted with Ethercon output connectors. This product supersedes our popular Rack-Split RDM product.
versaSplit XLR3 DMX Input Module (A) DMX Splitters & Wireless DMX Features Specification DMX512 input protection
+/- 80V electrocution 12KV ESD
Optically isolated DMX512 input Power and data indication Fix Mode Compatible with DMX512, DMX512 (1990), DMX512-A, RDM Price £99 IP Rating: Indoor use Power: n/a Input Voltage: 3V3 Height: 44mm Width: 76mm Depth: 76mm The versaSplit XLR3 input module adds DMX input capability to the entire versaSplit range.versaSplit CRMX Input Module (A) DMX Splitters & Wireless DMX Features Specification CRMX wireless antenna Link set switch Split - Fix switch Signal strength bargraph Status indicator Price £199 IP Rating: Indoor use Power: n/a Input Voltage: 3V3 Height: 44mm Width: 76mm Depth: 76mm The versaSplit CRMX input module adds wireless DMX input capability to the entire versaSplit range.
DMX-Buffer XLR Ever need to go further than the maximum of 300M with DMX? Don't want to use an expensive DMX Splitter for a simple job? DMX-Buffer allows you to go that extra distance by re-buffering a DMX line giving you an extra 300M.
DMX-Fix (A) DMX Splitters & Wireless DMX Features Specification DMX-Fix is the solution to those occasional nasty compatibility problems. The ones that usually occur when the crew should all be relaxing in the bar! The recent evolution of more sophisticated DMX512 control, including DMX512-A and RDM (Remote Device Management) provide a wealth of benefits. Unfortunately they have also highlighted some of the design flaws in products on the market.
nanoScope (B) Handheld Test & Control Features Specification Small form factor Colour coded display Battery powered Pixel mimic nanoScope is a small battery powered tester for DMX512 and RDM. It is built into a 5 pin XLR connector with a translucent plastic case. nanoScope lights up in different colours to express its findings. Two modes of operation exist, selected by a recessed slide switch which also doubles as the power switch. Price £59.
Jump-Start (B) Handheld Test & Control Features Specification Jump-Start is a small hand-held RDM and DMX512 programmer. As the new Remote Device Management (RDM) protocol gains acceptance, the DIPswitches on the rear of moving lights will gradually disappear. There is no need for them as RDM allows the lighting console to patch the lights.
Micro-Scope 3a DMX512 and MIDI are now common place digital protocols and so specific test equipment is no longer a luxury. Micro-Scope 3a provides all the features regularly needed by both theatre and touring staff. Micro-Scope 3a is a small hand-held DMX512 receiver and transmitter. It can operate as a Moving Lamp tester, a Flicker Finder or as a Rigger's Remote. It is powered by an internal rechargeable battery, with a normal life of 25 hours and uses a high brightness backlit LCD screen.
Mic-Edit Mic-Edit is an off-line editor for Micro-Scope 3a. It runs under Windows 95/98/ME/NT/2K/XP/Vista(32) and allows all configuration, lamp libraries and memories to be edited, stored on disc and then downloaded to Micro-Scope 3a via the serial cable. Mic-Edit ships with a library of lamp personalities for over 200 lamps. The package includes the serial link interface which allows Micro-Scope 3a to communicate with a PC via the RS232 port. A USB adapter is also included.
Control Freak Control Freak (2nd edition published 2010) is a book by Artistic Licence's Wayne Howell. (B) Handheld Test & Control Features Specification Chapter Headings; Lighting Control Protocols The Data The Wire DMX512 Networks Fault Finding & Common Faults DMX512-A Conversion & Specialist Design Considerations Remote Device Management - Using RDM - Packet Structure - Discovery Commands - RDM Splitters Price £28.
Art-Lynx O/P Art-Lynx O/P is a DIN Rail Ethernet to DMX512 converter. It converts two universes of Art-Net or sACN Ethernet into DMX512. RDM is supported when used with Art-Net. (C) Ethernet and Art-Net Features Specification DMX routing by Ethernet Two DMX512 outputs 10BaseT Ethernet Port DHCP Compatible with DMX512-A RDM V1.0 (E1.
Down-Lynx UK Down-Lynx converts Ethernet data into two universes of DMX512. Down-Lynx is housed in a standard 'Two-Gang' panel that is compatible with all standard UK conduit and surface mount boxes; back box supplied. (C) Ethernet and Art-Net Features Specification DMX routing by Ethernet Art-Net 3 and sACN compatible Two DMX512 outputs 10BaseT Ethernet Port DHCP supported Power indicator Data activity indicators Compatible with DMX512-A RDM V1.0 (E1.
Net-Lynx O/P (C) Ethernet and Art-Net Features Specification Net-Lynx O/P is a desktop ethernet to DMX512 converter. It converts Art-Net ethernet data into two universes of DMX512/RDM, or sACN into two universes of DMX512. Net-Lynx O/P is housed in a small, robust extruded case. The ethernet connection is made via a latching Neutrik XLR-RJ45 connector. This connector also accepts standard RJ45s. The power input can be either from the ethernet cable using the IEEE 802.
Cata-Lynx O/P Cata-Lynx O/P is a rack mounted ethernet (Art-Net or sACN) to two universe DMX512 converter. Cata-Lynx O/P is designed with all data cable entries at the front of the product, including two DMX512 outputs via 5-pin XLR and a latching network connection via Ethercon. The universal mains input connector is located on the rear of the unit. Configuration is as simple as selecting the required universe on the front panel wheel selections.
Data-Lynx I/P Data-Lynx I/P is a 1RU 19" rack mounting DMX512 to Art-Net converter. The product is a no frills solution that gives the customer maximum packing density and the lowest cost whilst maintaining the customary Artistic Licence quality. The standard product provides 12 DMX512 inputs, using front mounted Neutrik XLR 5 pin connectors. Network connectivity is achieved using either the front or rear mounted Ethercon RJ45 connector.
Art-Switch PoE4 Art-Switch PoE4 is a DIN-Rail Ethernet switch. It provides five 10/100BaseT Ethernet ports, four of which support Power over Ethernet (PoE). Art-Switch PoE4 is housed in a small robust DIN Rail case that can also be surface mounted. All Ethernet connections are made via RJ45's. Each port has individual indicators to show speed of connection, PoE use and activity. The PoE output on the four ports complies with the IEEE802.3af standard.
DMX-Workshop (C) Ethernet and Art-Net Features Specification View DMX data Flicker finder with time stamp Oscilloscope data view Max / Min data view Transmit signature data View Text & SIP DMX packets Graph DMX and network refresh Analyse and decode network data Packet and bandwidth counting Node management Data routing utility RDM data configuration Art-Net SDK Price £-1 Software Package is available via download only Windows XP & Windows 7 & 8 (32 & 64-bit) DMX-Works
Light-Switch Light-Switch is a DMX512 playback system, controlled by 14 buttons. Features include 3 pages of 8 memories. Each memory contains all 512 channels and an Independent Fade Time. A fourth page provides 6 sequences with variable step times and direction control. Up to 15 Light-Switch panels can be connected to a single DMX512 cable. Each panel can be programmed to control a specific zone or group of DMX channels. This allows Light-Switch to be used in multi-room or multi-zone applications.
Sign-Control Sign-Control is aimed at the LED signage industry suitable for control over LED display applications. The product is available in a DIN Rail case that can also be surface mounted to a wall. Sign-Control is a DMX512 playback system, controlled by 14 buttons. Features include 3 pages of 8 memories. Each memory contains all 512 channels and an Independent Fade Time. A fourth page provides 6 sequences with variable step times and direction control.
dVnet (D) Lighting Controllers & Media Convertors Features Specification dVnet is all a user needs to convert a video creation to light. A digital-video-tonetwork converter aimed at retail and architectural applications where a media facade or light sculpture is to be controlled by video and the complexity of a media server is not required. The digital video input is in HDMI format.
Colour-Tramp 1U Colour-Tramp is a lighting control system specifically designed to handle the complexity of two and three dimensional lighting arrays. Colour-Tramp combines the concept of lighting control with a graphic editor. The lighting array is entered using a sophisticated graphic user interface. Show programming is then performed using colour palettes and visual editing tools.
Finger-Trouble (D) Lighting Controllers & Media Convertors Features Specification Finger-Trouble is a Windows application designed for touch screen operation. It provides a customer facing interface for selecting and triggering audio-visual and lighting events.
Rail-DALI-DMX (E) Interface Products Features Specification Rail-DALI-DMX is a true bridge between architectural control and entertainment lighting. The product converts one circuit of DALI to DMX512 and has two personalities that control the type of conversion. The first personality will simulate a variable number of DALI ballast, offering full control over short address, groups and scenes, and control the DMX fixtures directly.
Rail-PSU-D4 The D4 is a four circuit DALI Bus Power Supply. Rail-PSU-D4 outputs are designed to complement the four Rail-DMX-DALI outputs. Users can power both from the same DC power supply in a power-through connection. Each circuit has two sets of connectors so the D4 can simply be daisy chained into each DALI bus. Red LEDs give power status. Green LEDs show data activity. Please note that a DC power supply is required for this product.
Dali-Scope (E) Interface Products Features Specification Dali-Scope is a hand-held tool for testing, programming and configuring DALI (Digital Addressable Lighting Interface) devices. Dali-Scope is the first handheld tool specifically designed for DALI. The product display uses high brightness LEDs making it easy to use in low light conditions. The moisture proof keypad uses single function keys for ease of operation.
Rail-Demux (E) Interface Products Features Specification 16 Analogue outputs 0 - 10V DC output DMX512 Interface RDM V1.0 (E1.20 - 2006 ESTA Standard) DIN Rail mount Surface mount DMX512 to analogue conversion has two key applications: Upgrading older analogue dimmers and driving fluorescent ballasts. Price £395 Input Voltage: 24VDC Power: 10W Input Protocol: DMX512 / RDM Output Ripple: 0.
Rail-Switch (E) Interface Products Features Specification Six mains relays DMX512 Remote Device Management DIN Rail mount Surface mount In theatre, touring and architectural applications there are invariably some devices that do not provide a useful form of remote control. Applications include animatronics, fog machines, theatre practicals, cue lights and video remote control. Rail-Switch is an elegant solution to the automation of these devices.
Art-Relay Art-Relay is a mains relay unit that is controlled using the Art-Net or sACN Protocol. Power input can be from either a 24 to 48V DC power supply or PoE (Power over Ethernet) The Relays are 240 VAC 6A rated and each of the twelve relays have normally open and normally closed contacts available The product is presented in a DIN Rail case which allows rail or surface mounting. Configuration is via the internal web-server or DMX-Workshop.
Rail-Tran (E) Interface Products Features Specification Six Darlington drive outputs DMX512 Remote Device Management DIN Rail mount Surface mount Rail-Tran provides six darlington transistor outputs capable of operation to 50V DC at 450mA. Rail-Tran is housed in a high impact DIN-Rail mounting case with DMX512 and RDM support.
Features Specification DIN Rail Case 8 Channel DMX Trigger (0 or 255 value) Inputs are fully Opto-Isolated Voltage Output for easy Connection Rail-Contact monitors the state of 8 contact closures and translates this into a value on DMX channels 1 to 8. When a contact closure is active the corresponding value is DMX is 255. If more than 8 channels are required then two Rail-Contacts can be linked together to form a 16 channel device.
Henry Henry and Henrietta are RJ45 to 5 pin XLR adapters. The products are intended for assembly into patch bays and wall panels, allowing CAT5 cabling to be used for DMX512.
Flexi-Strip RGB30 1M Flexi-Strip RGB is a range of RGB LEDs on a flexible circuit board, encapsulated within a flexible, clear silicone tube. Rated at IP67, the encapsulated housing protects Flexi-Strip’s LEDs from moisture, dust and damage making it ideal for both internal and external applications, in dry or wet conditions. Each strip is backed by a self-adhesive tape so it can be attached quickly and easily in any location.
Flexed-Up (F1) LED - Constant Voltage Features Specification 20 Internal Shows Internal Switch or Remote Switch option Custom shows available 3 outputs for RGB control High Power channel DIN Rail or Surface Mount Flexed-Up is a 3 channel RGB controller for Constant Voltage LED products such as Artistic Licence Flexi-Strip. Housed in a DIN Rail enclosure Flexed-Up can be attached to standard DIN Rail or can be surface mounted.
Candle-Power CP12-0 (F2) LED - Constant Current Features Specification Candle-Power is an LED dimmer designed to control high power LED devices such as those available from Lumileds and Cree. Candle-Power is based on a modulation technique, invented by Artistic Licence, called Asymmetric Frequency Modulation AFM. AFM is an evolution of the frequency modulation technique pioneered by Artistic Licence and published to the public domain in 2002.
Candle-Power CPM-350 (F2) LED - Constant Current Features Specification DMX512 / RDM 3 channel module Price £85 Output: 3 Channel AFM Modulation Output Current: 350mA Duty Cycle: 100% @25C Candle-Power module. 1W (350mA). Candle-Power CPM-500 Price £105 Candle-Power CPM-700 Price £105 CP24-24-350mA (24V-300W) (F2) LED - Constant Current Features Specification The product is a Rack-Mounted enclosure providing up to 24 channels of dimming.
Multichrome Flex Medium Res Multichrome-Flex is the next generation of the highly successful Pixi-Flex with the added benefit of IP67 rating for exterior use. Rugged, durable and weather resistant, each pixel is encapsulated in a plastic housing so its creative capabilities can now be applied to exterior events, concerts, and even architectural applications.
Multichrome D1 (F3) LED - Pixel Features Specification 9 VDC Power supply for Multichrome Flex, Web and Tube Wall, ceiling or truss mount DMX512-A / RDM interface RDM Draft V1.0 capable Multichrome D1 is an integrated power controller for Multichrome Flex, Web and Tube Multichrome D1 combines the functions of a power supply and an isolated DMX512-A / RDM interface. The product can be wall, ceiling or truss mounted. D1 uses RDM for configuration.
Multichrome E2 (F3) LED - Pixel Features Specification Multichrome E2 is an DIN Rail mounted version of Multichrome E1 designed for permanent installations. E2 is an integrated power controller for Multichrome Flex, Web and Tube. It will find primary application with Multichrome Flex due to its form factor. 9 VDC Power supply for Multichrome Flex, Web and Tube DIN Rail Mounted Single Art-Net connection Virtual RDM V1.0 (E1.
PSU-9-1.5-DCJ Desktop Power Supply with a DC Jack Connector (P) Power-Supplies Features Specification Micro-Scope 3a DMX-Buffer Show-Control Common-Sense MIDI-Scope Preset-6 Preset-12 PSU-9-1.5-DR2 Input Voltage: Universal Output Voltage: 9V DC Maximum Current: 1.5A O/P Connector: DC Jack (P) Power-Supplies Features Specification Art-Lynx Art-Relay Desktop Power Supply with a 2pin Screw Terminal PSU-9-1.
CONDITIONS – TERMS OF SALE Preliminary Definitions In these Conditions:1 “Buyer” means the person whose order for the Goods is accepted by the Seller 2 “Contract” means the contract between Seller and Buyer for the sale and purchase of the Goods 3 “Goods” means the goods and /or services including any parts of them that the Seller is to supply in accordance with these conditions 4 “Seller” means Artistic Licence Holdings Limited or Ptarmigan Holdings Limited or any subsidiary of either Company 5 The heading
Price List and Index (all prices exclude UK VAT) Art-Lynx I/P............................................................................. Page 20 Art-Lynx O/P........................................................................... Page 20 Art-Merge ............................................................................... Page 26 Art-Pipe................................................................................... Page 42 Art-Relay .............................................................
Artistic Licence 51
T +44 (0)20 8863 4515 F +44 (0)20 8426 0551 www.ArtisticLicence.