Instruction manual

Artistic Licence
13
DMX-Buffer XLR
(A) DMX Splitters & Wireless DMX Price £155
Features
 Protected DMX512 input
 Single buffered output
 Bidirectional data comms
 Jabber Detection
 Desktop Style case
 Compatible with DMX512,
DMX512 (1990), DMX512-A
 Protocols:
 RDM Draft V1.0
 RDM Standard V1.0 (E1.20 - 2006
ESTA Standard)
 HES Talkback
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 5W
 Input Voltage: 9VDC
 Power Connector: DC Jack
 Width: 81 mm
 Height: 56 mm
 Depth: 42 mm
 Data Connection: XLR 5pin
Ever need to go further than the maximum of 300M with DMX? Don't want to
use an expensive DMX Splitter for a simple job?
DMX-Buffer allows you to go that extra distance by re-buffering a DMX line
giving you an extra 300M.
It is housed in a protective metal case and is powered from a standard 9V
PSU with a DC jack connector. DMX-Buffer XLR uses standard 5pin XLR
connectors for both input and output connection. A version that uses RJ45 /
Ethercons is also available.
Full RDM support is also provided so not only can you control the DMX
fixtures you can also configure them from further away.
DMX-Buffer RJ45
Price £155
DMX-Split RDM
(A) DMX Splitters & Wireless DMX Price £405
Features
 Optically isolated DMX512 input
 Five buffered outputs
 Bidirectional data ports
 Jabber Detection
 Powered by 24VDC Scroller Power
 Truss Mount Adapter available
 Compatible with DMX512,
DMX512 (1990), DMX512-A
 Protocols:
 RDM Standard V1.0 (E1.20 - 2006
ESTA Standard)
 HES Talkback
Specification
 Listing: CE FCC
 IP Rating: Indoor use
 Power: 5W
 Input Voltage: 9-24VDC
 Height: 115mm
 Width: 195mm
 Depth: 55mm
 DMX Connections: XLR5
 Power Connection: XLR4
DMX-Split RDM provides a DMX512 input with a passive loop through
connection. The data is cleaned, optically isolated and then provided as five
independent outputs. Each of the five outputs is capable of driving 32 DMX512
fixtures. All ports use 5pin XLR connectors
DMX-Split RDM supports the RDM V1.0 (Remote Device Management)
Standard and Draft versions along with High End Systems talkback protocol.
DMX-Split RDM is powered from a 9-24VDC power source on a 4 pin XLR.
This allows the use of most Colour Scroller PSU's as a source of power. (A
separate Power Supply is available if required).
The unit is housed in a robust extruded aluminium case with an optional Truss
Mount Adapter available.