Instructions / Assembly

J
L
R
R
L
H
K
A
B
C
D
B
F
F
G
H
I
L
N
O
B Screw E Screw
D Long
Pole
F Board
I Frame
J Cap
M Wire
Clamps
H Short
Pole
L
N Track
A Stick
Cushion
1.Carefully unpack all parts from the
packaging and place them on a flat/
smooth surface. Be sure to remove all
the packaging materials from the lamp.
Screw and tighten the long poles (D) to
thick board (C) with screws(B), and
cover them with cushions(A). Tighten
the screw(E) on the top of long pole(D).
2.Place board (F) on screw(E) and
tighten long pole (D) on the the
screw(E) installed on step 1. Tighten
the screw(E) on the top of the long
pole(D).
3. Put tracks (N) and (O) into the
poles(D), tighten with screw(E)
Note:Please make sure the tracks(N)
and (O) are placed in the correct
direction for drawer(L).
4. Put drawer (L)
onto the tracks.
5. Place board (F) onto
the drawer (L).
6. Tighten long pole(D) on the
the board(F), then tighten
screw(E) on the top of the long
pole(D). Place board(G) onto the
poles (D).
7.Screw the short poles(H) on
board(G), tighten to the
correct position as above.
Slide the shade(K) into short
poles(H).
8. Place frame(I) onto short
poles(H) and tighten with
screw(B).
9.Put the caps(J) onto frame(I), cover the
screws(B). Attach the clamp(M) on the pole
to secure the wire , your lamp is ready to use.
Assembly Instruction
Item#: A808101EX
For customer service, please email: service@artivausa.com or visit us at
www.artivausa.com. We will response within 24 hrs Monday-Friday
9am to 5pm PST(except Holiday)

Summary of content (1 pages)