Instructions / Assembly

Before assembling your new lamp, please read the following precautions and instructions thoroughly
.
Ring Caps are pre-installed
on the Socket
Spring Washer, Washer and Screw A
are pre-installed at end of pole
Place the lamp indoor dry area only
.
The lamp produces very high temperature, always unplug
electrical cord and allow sufficient time for bulb to cool down before replacing bulb
.
The electrical wire is connected continuously through the poles, do not pull wire during unpacking,
bad connections may result
.
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to
reduce the risk of electric shock
.
This plug will fit in polarized outlet one way only
.
If the plug does
not fit fully in the outlet, please reverse the plug. If it still does not fit, contact a qualified electrician
.
Never use an extension cord unless the plug can be fully inserted
.
Do not alter the plug
.