Contents Le présent appareil est conforme aux Partie 15 des règlements de la FCC et CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouill -age radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionne -ment. WARNING: TO REDUCE THE RISK OF 1.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
24. Children should be supervised to ensure that they do not play with the appliance. FRONT SIDE 25. Ensure children and babies do not play with plastic bags or any packaging materials. WARNINGS: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Avertissement: pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.
CONNECTING TO AC POWER Before using your Bluetooth speaker, you should connect it to AC (mains) power. 5. Once paired with a device, a blue light on the STATUS indicator will glow steadily and two beep sound confirms that pairing is completed. On some devices, you must then select “use as a stereo audio device” or similar on the device’s Bluetooth menu. Once paired, your device should connect to the CE7200 whenever within the range. 1. Plug the AC/DC adaptor into the AC (mains) power socket outlet.
USING THE SPEAKERPHONE CARE AND MAINTENANCE To use your Bluetooth speaker as a speakerphone for receiving a phone call from a Bluetooth enabled phone. 1. Following the “pairing your bluetooth device” section to set up the bluetooth connection. PLACING THE UNIT Place the unit on a level surface away from sources of direct sunlight or excessive heat. Protect your furniture when placing your unit on a natural wood and lacquered finish.
SPECIFICATION TROUBLE SHOOTING PROBLEM No power when POWER is on POSSIBLE CAUSE SOLUTION AC/DC adaptor is not plugged into a wall outlet or the connector is not plugged into the power supply jack on the back of the unit. Plug the AC/DC adaptor into a wall outlet and plug the connector into the supply jack on the unit. No power when plugged in The AC outlet may not have power. Check the outlet with a working lamp or other electrical appliance.
