Handheld Bluetooth Speaker With Speakphone INSTRUCTION MANUAL CE7000-BT Thank you for purchasing this Handheld Bluetooth Speaker With Speakphone. Please read this instruction manual carefully before using this product to ensure proper use. Keep this manual in a safe place for future reference.
WHAT’S IN THE BOX Contents 1. CE7000-BT Handheld Bluetooth Speaker 2. AC-DC Power Adaptor 3. Instruction Manual 4. Warranty Card If you are missing any parts above, please contact ADT Digital LLC.
WARNINGS The CAUTION marking is located on the bottom / rear panel. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
FCC AND CANADIAN ICES NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
11. Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instruction. 12. Grounding or Polarization – This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other).
21. Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 22. Unplug this apparatus during lighting storms or when unused for long periods of time. 23.
CONTROL LOCATION FRONT SIDE 1 2 3 6 4 7 5 REAR SIDE 8 9 11 10 1. STATUS indicator 2. PAIR/ ANSWER / END button button PLAY/ PAUSE 3. VOLUME - button 4. Speaker (L ch.) 5. POWER STANDBY / REJECT CALL 6. VOLUME + button 7. Speaker (R ch) 8. AUX IN jack 9. POWER ON/OFF switch 10.Battery compartment 11.
MAKING THE CONNECTIONS Battery Installation 1. Remove the battery compartment cover. 2. Install 4 “AA” size (UM-3) batteries (not included) in the battery compartment following the polarity markings shown on it. 3. Replace the battery compartment cover. Battery Precautions (Use AA Size UM-3 (LR6) x 4 pieces) The precautions below should be followed when using batteries in this device: 1. Use only the size and type of batteries specified. 2.
MAKING THE CONNECTIONS When the unit is not operated by the AC power or unused for long period of time, please remove the power adaptor from the wall outlet and unplug from the unit. OPERATION POWERING ON/OFF THE UNIT 1. After connecting the AC power, turn ON the POWER switch on the rear of the unit, the STATUS indicator will light up in RED to indicate that the unit is in standby mode. 2. Press the “ ” button once to turn on the unit. 3.
OPERATION To connect previously paired Bluetooth device 1. Your Bluetooth speaker can store one previously paired device for quick pairing during power on. 2. To connect a previously paired device after power on, if the previously paired device is found with the range, the unit will pair the device automatically and the STATUS indicator will turn to BLUE steadily. Two beeps will confirm the pairing is completed. To connect a new Bluetooth device 1.
OPERATION USING THE SPEAKERPHONE To use your Bluetooth speaker as a speakerphone for receiving a phone call from a Bluetooth enabled phone. 1. Follow the “PAIRING YOUR BLUETOOTH DEVICE” section to set up the Bluetooth connection. 2. When a call is received during music is playing, music will be muted to hear the ringtone. STATUS indicator will flash in RED color to indicating the incoming call. Press the “ANSWER” button to answer the call, or press the “ ” button to ignore the call.
OPERATION NOTE: • Play/Pause control plugged-in device. only works in Bluetooth mode. It does not control the • When you plug in the AUX IN cable during Bluetooth playback, the Bluetooth playback will be interrupted and switched to the AUX mode. After unplugging the AUX IN cable from the unit, the music may be or may not be resumed depending on different Bluetooth devices. If the music has been pause on you device, please restart / resume playback on your device manually.
TROUBLE SHOOTING If you have followed the instructions and are having difficulty operating the unit, locate the PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to locate and remedy the problem. PROBLEM No sound when playing audio via Bluetooth No sound when playing audio via AUX IN Sound comes from only one speaker when playing audio via AUX IN The person whom you call via speakerphone cannot hear your voice clearly.
SPECIFICATION Power Supply AC-DC Power Adaptor DC Input Input: 100 – 240VAC, 50/60Hz Output: 5VDC, 1A 4 x “AA” size (UM-3/LR6) Battery (Not included) Bluetooth Protocol Support A2DP / HFP Audio Power Output 2 x 2W (rms) Dimensions 7.52” (W) x 6.69” (H) x 6.50” (D) 191mm (W) x 170mm (H) x 165mm (D) Weight 1.01 lb 0.46 kg Specifications are typical, individual units might vary. They are subject to continuous improvement without notice and without incurring any obligation.
