User's Manual

3
Charging your portable device
Playing from a Bluetooth device
This unit features a USB port for charging your portable device (iPod, iPhone, Android phone, etc.) when used
with the USB charging cord that came with your device.
1. Plug one end of the USB cable (not included) into the USB charging port located on the rear of the unit.
2. Plug the other end of the cord into the device you wish to charge.
3. Observe the battery charge indicator on your portable device to make sure the charging process starts
normally.
CAUTION:
Before charging, please refer to the user manual of the device youwish to charge to make sure the charging
current requested does not exceed 2.5A (2500mA). Overloading the charging circuit may damage the unit
permanently and void the warranty.
1. The USB charging port of this unit supplies a DC 5V output at 2.5A (2500mA) maximum current to
charge your portable device battery and it cannot support any other voltage range.
2. Make sure the device you want to charge has a battery charge rating of DC 5V only.
3. The USB port of this unit is designed for portable device battery charging only and it cannot support data
transfer or connect to computer.
4. Do not connect the USB port of this unit to other external power charger USB ports, it may damage both
units and void the warranty.
You can play music from your Bluetooth device wirelessly to CEU6800-BT after successfully.
1. Selecting your favorite song, press the PLAY button on your Bluetooth device to playback.
2. Adjust the VOLUME +/- buttons of your Bluetooth device until you reach a comfortable listening level.
Notes:
1. Your Bluetooth enabled device will not play the music through the speaker, even if connected (linked),
if the device does not support the A2DP Bluetooth profile.
2. Remember to turn off the CEU6800-BT when you have finished listening, set the power ON/OFF switch
to the OFF position.
3. Don't forget to switch off the power of your external audio device as well.
BLUETOOTH OPERATION
If the unit has never been paired with a Bluetooth device before, you need to follow the pairing instructions below
to link the CEU6800-BT with your Bluetooth device.
1. Slide the Power switch to ON position on the rear of unit.
2. The unit will search the paired device with the light blue indicator flashing quickly and "Do Do" is heard.
3. Turn on Bluetooth function of your device and enable the search or scan function to find CEU6800-BT.
(See your device's instructions to add or setup a Bluetooth device).
4. Select "CEU6800-BT" from the device list when it appears on your device screen. If required, enter the
pass code "0000" to pair (link) CEU6800-BT with your device.
5. After successfully paired with a device, The Blue indicator will flashing slowly and you will hear the sound
"DOM" to confirm that pairing is completed.
Note : If you can't pair the unit with your Bluetooth enabled device, you can try to turn OFF & ON the power of
your unit to solve the problem.