User's Manual

4
TROUBLESHOOTING
If an issue arises, please refer to the points listed below. If you are unable to remedy a problem by following
the table, please consult the Service Center.
PROBLEM
POSSIBLE REASON(S)
SOLUTION
There is no sound coming
from speaker.
Volume not adjusted of the
bluetooth device.
Adaptor is not correctly.
connected to power
supply.
Adjust the volume.
Connect the adaptor
properly.
The main unit does not
react to any button being
pressed.
Electrostatic discharge.
Turn off the unit, disconnect
the adaptor plug from outlet
and then reconnect after a
few second.
No Charging
The USB cable (not
included) is not plugged
into the USB jack on the
CEU6800-BT.
Plug the USB cable (included)
into the USB jack on the
CEU6800-BT.
TECHNICAL SPECIFICATIONS
Bluetooth Bluetooth Specification version 3.0.
Support profile A2DP
Output Power 3W x 2
Speakers 8W x 2, 8 Ohms. 3 inch.
USB Charger DC 5V 2.5A
Power Source:
AC adaptor Input : AC 100-240V ~50 / 60Hz
Output : DC 9V 3.5A
Dimensions 165(H) x 330(W) x 138(D) mm.
Weight 1.06 Kg.
Sound is distorted
Volume level is set too high.
Decrease the volume of the
speaker
Sound source is distorted.
If the source sound file is of
poor quality, distortion and
noise are easily noticed with
high-power speakers.