GLOBE BLUETOOTH SPEAKER INSTRUCTION MANUAL GL703-BT
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
IIIMPORTANT SAFETY INSTRUCTIONSCONTINUE 13. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. 14. Power Sources – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Do not overload wall outlet. 15. Do not attempt to dismantle, open or repair this product yourself.
COMPLIANCE WITH FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
4
CONNECTING POWER Plug the supplied power adapter small end into the DC jack located on the rear panel, plug the adapter into the standard AC wall socket. CAUTION: The unit is designed to operate from a mains supply of AC 120V~60Hz. If the adapter does not fit properly, turn it over and again. Do not force it. NOTES: When the unit not operation by the AC power or unused for long periods of the time. Please remove the power adapter from the wall outlet and unplug from the main unit.
BLUETOOTH OPERATION If the unit has been paired with a Bluetooth device before, you need to follow the pairing instruction below to link the GL703-BT with you Bluetooth device. 1. Press the power ON/OFF button to turn on the unit, power indicator will light up. 2. The unit will search the paired device with the light bluetooth indicator flashing quickly and "Do Do" is heard. 3. Turn on Bluetooth function of your device and enable the search or scan function to find GL703-BT.
OTHER AUDIO DEVICES By using a home audio connection cable (not included), you can listen to an external audio unit through this unit's speakers. Before making any connections, Turn off the power to all equipment. 1. Plug a 3.5mm audio cable (not included) into your external music player and connect the other end (3.5mm Jack) into the AUX IN jack at the rear of the unit. 2. Power on the unit and make sure your external music player is turned on. 3. Start music playback on your external music player. 4.
TROUBLESHOOTING GUIDE Symptom The unit does not respond (no power) Possible Problem The unit is disconnected from the AC outlet. The AC outlet has not power. Solution Reconnect to the AC outlet. Try the unit on another outlet. Unit is ON but there The volume control has been Turn the Volume control to a is low or no volume turned all the way down. higher output.
Operating frequency: 2402-2480MHz
