User's Manual

USB OPERATION
REPEAT PLAY
1. During playback, press PROGRAM/REPEAT button once,the REP ONE indicator
will appear on the TFT screen, it can keep repeat the current track.
2. To repeat the Directory/Folder, press PROGRAM/REPEAT button twice,
the REP FOLDER indicator will appear on the TFT screen.
3. To repeat all tracks in disc, press PROGRAM/REPEAT button again,
the REP ALL indicator will appear on the TFT screen.
4. To clear the REPEAT function, press PROGRAM/REPEAT button again,
the NO REP indicator will appear on the TFT screen.
PROGRAMMING USB PLAYBACK
This unit can be programmed to play up to 20 tracks/files in USB mode. Plug the USB flash
drive and select USB mode. (without pressing the PLAY/PAUSE button).
1) Press PROGRAM/REPEAT button once in stop mode. “PRG SET 00:XXX” will be shown
on the screen.
2) Press the SKIP buttons to select the desired track to be programmed.
3) Press PROGRAM/REPEAT button again to save the selected track/files.
4) Repeat steps 2–3 to program up to 20 tracks/file.
5) Press the PLAY/PAUSE button to play the programmed tracks after programming is
completed. The “PROG” indicator will appear on screen during the programmed
6) To clear program and resume normal playback, press the STOP button twice during
playback to clear the programmed tracks.
REMARK:
The unit can store up to 20 tracks/files in the programmable memories. During the
programmed playback, user can still select the “repeat one/repeat all” function.
EN - 16
playback.