User's Manual

CD OR CD+G / MP3+G OPERATION

This unit is designed to play CDs/CD+G/MP3/MP3+G

disc bearing the identification logo respectively. If the

disc does not conform to the standard, it may not play

properly.

NOTE: The unit may not be able to read CDR or CDRW disc correctly. The readability

depends on the quality of recording produced by CD recorder or CD writer.

LOADING A DISC

3. Gently close the CD Door to the CD compartment. The Karaoke Machine begins to read

the disc and “READ” will be displayed. After that, the operation icon will appear on the top

of the TFT screen.

4. Press PLAY/PAUSE to play the disc. (If no disc is loaded, it will display “NO DISC”)

STOP

If the STOP button is pressed in the course of playing, the disc will cease to play.

SKIP PLAY (For both CD and CD+G/MP3+G discs)

In stop or playback mode, you can skip up or down to a specific track by

pressing the forward or back SKIP Button.

PLAY/PAUSE

1. To start playing, press the PLAY/PAUSE button once, the currently track number and

PLAY indicator will appear on the screen.

2. To temporarily stop playing, press the PLAY/PAUSE button, the PAUSE indicator will be

shown on the screen.

3. To resume play, press the PLAY/PAUSE button again, the PLAY indicator will be shown on

the screen.

NOTE: - Pressing pause when a CD+G/MP3+G is playing may cause distorted lyrics

on the screen, any distortion will remain until the whole screen is

refreshed during an instrumental break or you stop the song and start it

from the beginning

- Never place anything except a compact disc on the disc compartment.

Foreign objects can damage the unit.

- Do not apply excessive force to disc cover.

- Only place one disc on the disc compartment at a time.

- Do not open the disc cover of the CD compartment while it’s playing.

EN - 11

TURNING POWER ON/OFF

1. To turn on the Karaoke Machine, switch the POWER button at the

back to ON. Press the STANDBY button once, the POWER

indicator will light up to full brightness and TFT screen will display

the OPENING SCREEN and start to read CD. (If no disc is loaded,

it will display “NO DISC”)

2. To turn off the system, press the STANDBY button again. The power indicator and

TFT screen will turn off. Switch the POWER button at the back to OFF to cut off the

power.

Open the CD door, place a disc in the CD compartment with the printed side facing down.

Press FUNCTION button to toggle CD mode.