User's Manual

EN - 16
2. The Bluetooth indicator will flash quickly. If the unit does not automatically begin to
pair, press and hold the button.
3. Using the native controls on your Bluetooth Device, select the " KS878BT" in your Bluetooth
setting to pair.
4. When successfully paired, the Bluetooth indicator will stop flashing.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased
due to a reset of the devices.
If your device unpaired, follow the above steps again.
If any pairing issues occur, un-pair the unit on your Bluetooth device and follow the above
steps again.
BLUETOOTH SETUP
1. Follow the instructions for Pairing a Bluetooth Device.
2. Use the native controls on the connected Bluetooth Device to select a track.
3. To play, pause or skip the selected track, use the native controls on the connected Bluetooth
Device or press the buttons of unit.
4. Audio playback from the connected Bluetooth device can now be heard through the speaker.
PLAYING MUSIC VIA BLUETOOTH
Pairing is the term used when two Bluetooth devices are connected wirelessly for the first time.
BLUETOOH OPERATION
ENERGY SAVING (Auto Power System - APS)
1 Press
FUNCTION
button to toggle to Bluetooth mode.
PAIR
PLAY/PAUSE & SKIP
The unit will automatically turn to ‘Standby’ mode in 15 minutes in the following situations:
1. There is no CD in the compartment or CD had been stopped for playing when the
source had been selected to CD.
2. There is no USB flash drive plugged in or USB flash drive had been stopped for playing
when the source had been selected to USB.
3. There is no audio cable plugged into the LINE IN jack when the source had been
selected to AUX.
The unit can be resumed to turn on by pressing the STANDBY button once.