User's Manual

11
USING RCA SOURCE
You can connect Big Blue Tower to your audio source using an RCA cable (included).
1. Tap the Analog touch sensitive control to put Big Blue Tower into Analog mode.
2. Insert one end of the Dual RCA Cable (included) into the appropriately colored
R/L LINE IN jacks on audio source’s left and right audio output jacks.
3. Insert the other end of the Dual RCA Cable into the appropriately colored R/L
LINE IN jacks on Big Blue Tower.
4. Use your audio device to control music playback and volume through Big Blue.
Note: If there are no fixed-level audio outputs on your audio source, connect
the Dual RCA Cable to the Y Adapter 3.5mm Cable (included) to connect to
a 3.5mm jack.
OUTPUTTING SOUND
Connect other equipment or speakers by using audio cords with mini jacks (not
included) to the AUX Out Port on the back of Big Blue.
COMPATIBILITY
Bluetooth 2.0 or above device with A2DP.