User's Manual

804336_INS_Big Blue Media Tower

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

SET UP

1. Connect the ADAPTER’s jack to the DC IN POWER PORT on the back of

Big Blue Tower.

2. Plug the ADAPTER into an electrical outlet.

PAIRING YOUR DEVICE

1. Prepare your device to pair using Bluetooth, making sure you are within 33 feet

of Big Blue. Refer to your device’s owner’s manual for details if necessary.

2. Turn the Big Blue Tower on by pressing the POWER/PAIRING button.

3. Tap the Bluetooth touch sensitive control to put Big Blue Tower into

Bluetooth mode.

4. Press and hold the POWER/PAIRING button until the LED RING starts flashing.

5. The Big Blue Tower is in pairing mode when the LED RING is flashing. Big Blue

Tower will wait for a connection in pairing mode for up to 3 minutes.

6. Once Big Blue Tower is in pairing mode and your device is ready to pair, select

“Big Blue Tower.” If prompted, use 0000 as a PIN for the pairing code.

7. Once Big Blue Tower is selected, the LED RING will change to solid blue and a

beep will sound to confirm pairing is complete.

Note: To cancel the pairing mode either press the POWER/PAIRING button

to power the unit off, or wait the 3 minutes for Big Blue Tower to cancel

pairing automatically. The LED RING will return to solid blue, and the unit will

remain on.