User's Manual
Table Of Contents
- User Manual
- Jup-8 V4
- Special Thanks
- Thank you for purchasing JUP-8 V4!
- Special Messages
- Introduction
- Table Of Contents
- ACTIVATION & FIRST START
- Quick Start: How to play JUP-8 V4 Presets
- Quick Tour of the Arturia JUP-8 V4
- How Analog Synthesis Works
- VCOs
- HPF and VCF Filters, VCA, and Envelopes
- LFO and VCO Modulator Controls
- Advanced Panel
- Dispersion
- The Preset Browser
- Software License Agreement
3.2.1. Settings
3.2.1.1. Global Settings: MIDI Channel
This data field determines which MIDI channel(s) the JUP-8 V4 will "listen" to. The default is
All (e.g., Omni mode). In this mode, any MIDI messages on any MIDI channel will play the
sounds of the JUP-8 V4. To set the JUP-8 V4 to respond to its own individual channel, choose
a value from 1 to 16.
Open this tab to set the MIDI channel (1-16, or ALL) that the JUP-8 V4 will respond to.
3.2.1.2. Preset Settings: Play Mode and Unison
These fields, in conjunction with the VOICE ASSIGN keys on the top panel, determine the
voice allocation of the JUP-8 V4. They are described below in Voice Assign [p.24]. Fields are
greyed out depending on the current voice mode: Solo, Uni, or Poly. Play mode is available
only in Solo and Uni, Unison is available only in Uni mode. In either Poly mode, only the Poly
pulldown window is available.
15 Arturia - User Manual Jup-8 V4 - Quick Tour of the Arturia JUP-8 V4