User's Manual

8.2.2.3. Accent
Below the Trigger row is the Accent row. Clicking on any of these blocks will turn it white,
and that step will be accented by an independent envelope that opens the VCF, (provided
that the filter isn't already open from an envelope, or its CUT being set wide open).
The sound of the accent depends on the settings of the Accent Decay and Env Amt controls
on the right side of the Sequencer window (above Scale).
Turn the Env Amount clockwise to start accenting the notes. The Accent Decay knob sets the
length of the accent.
8.2.2.4. Glide
Click on any box in this row to introduce a portamento effect to the start of that step. The
amount of Glide will depend on the setting of the Glide knob to the right of the Accent
controls. At full counter-clockwise there is no glide; at full clockwise (1) it will take the entire
step length to get to its target. At a setting of 0.500 (12 o'clock), the glide will reach its target
halfway through the step.
Step 29 has a red trigger box; that note will trigger the
main envelopes. Steps 30-32 have pink trigger boxes and
won't trigger the main envelopes, but Step 30 has an
accent, and will open the VCF with an accent envelope
with an immediate attack and decay time set by the
Decay knob. The Env Amount is at maximum. The last
step, #32, will glide in pitch
Arturia - User Manual Jup-8 V4 - Advanced Panel 58