User's Manual
Table Of Contents
- User Manual
- Special Thanks
- Thank you for purchasing the Arturia MiniLab MkII!
- Special Message Section
- Table Of Contents
- Introduction
- Overview
- MiniLab MkII and Analog Lab Lite
- MIDI Control Center
- Software License Agreement
- Declaration of Conformity
2.1.5. Octave buttons
Pushing one of the Oct - / + buttons will transpose the keyboard by as much as four octaves
up or down. The farther from center the keyboard has been transposed, the faster the
buttons will flash.
To reset the keyboard octave range back to center, press both buttons at the same time.
The button flashing can be desactivated by disablinging the "Octave Button Blink" in the "Device
settings" using the Midi Control Center. See chapter 4.7. Working with Device Settings [p.28]
2.1.6. Encoders
The sixteen encoders can be assigned to control any editable parameter on the selected
device. Encoders 1 and 9 are clickable, and can serve several functions within each preset
memory.
The assignments within each Analog Lab Lite preset and within each synthesizer type may
vary according to the parameters that are available.
6 Arturia - User Manual MiniLab MkII - Overview