User's Manual

3.2. Preset Selection
3.2.1. Preset #1 + Analog Lab Lite
When MiniLab MkII is first powered up it loads preset #1 from the internal memory. This
preset has been specifically configured to work with Analog Lab Lite.
The control assignments in preset #1 correspond to the parameters within Arturia’s soft-
synths, so with this combination there will be very little setup for you to do. It’s a very quick
way to get the exact sound you want and start making music with it.
Each time you select a new Analog Lab Lite preset it is possible the control assignments will
change. This is because there may be different parameters available for the synthesizer on
which that preset is based.
3.2.2. Analog Lab Lite preset selection
There are two ways to select Analog Lab Lite presets with MiniLab MkII:
3.2.2.1. Encoders 1 and 9
For rapid scrolling through the Analog Lab Lite Preset list, simply turn encoder 1. When you
see the preset you want, click the encoder to select it.
To narrow down the list of presets, use encoder 9 to scroll to one of the preset filter
characteristics and click the encoder. You can enable as many filters as you like. The
remaining choices will be displayed in the Results list in the middle of the Editor window.
Tap pad 14 to clear the preset filter selections.
Encoders 1 + 9 in Analog
Lab Lite
Arturia - User Manual MiniLab MkII - MiniLab MkII and Analog Lab Lite 11