User's Manual
Table Of Contents
- User Manual
- Special Thanks
- Thank you for purchasing the Arturia MiniLab MkII!
- Special Message Section
- Table Of Contents
- Introduction
- Overview
- MiniLab MkII and Analog Lab Lite
- MIDI Control Center
- Software License Agreement
- Declaration of Conformity
3.4.2.3. Pad 14: Clear all filters
It’s possible to specify several characteristics with encoder 9 when you’re looking for a
particular type of sound. In the example below, we are looking for an ambient, complex,
evolving sound from three different Arturia instruments:
If you see the preset you’re looking for in the Results window, select it with encoder #1 and
click on it.
To clear the filters and start over, tap pad 14.
3.4.2.4. Pads 15-16: Next/Previous Preset
Whenever Analog Lab Lite is active you can use pads 15 and 16 to select presets quickly.
They are hardwired to the left/right arrows at the top of the window.
This is easier to understand when you can see the Results window, so hide the Studio view
for now.
Tap pad 15 to select the previous preset in the Results list. Tap pad 16 to select the next preset
in the Results list.
18 Arturia - User Manual MiniLab MkII - MiniLab MkII and Analog Lab Lite