User's Manual

1.3. Installation
1.3.1. Warning
Do not place this product in a place or position where anyone might walk on, trip over,
or roll anything over power cords or connecting cables. The use of an extension cord is
not recommended. However, if you must use one, make sure that the cord can handle
the maximum current needed by this product. Please consult a local electrician for more
information on your power requirements. This product should be used only with accessories
supplied or recommended by Arturia. When used with any such products, please observe
all safety markings and instructions that accompany them.
Always power-off all audio gear before making any connections. Failing to do so may
damage your speakers, the KeyStep 37, or the other audio equipment. After completing all
connections, set all volume levels to zero. Power-on the various devices, with your audio
amplifier or monitoring system last, then raise the volumes to a comfortable listening level.
1.3.2. Register your Instrument
Registering your instrument establishes your legal ownership of it, which entitles you to
access the Arturia Technical Support service and to be informed of updates. Additionally,
you can subscribe to the Arturia newsletter to be informed of Arturia-related news as well as
promotional offers. Connect to your Arturia account](https://www.arturia.com/login)), go to
the section My Registered Products, then add the KeyStep 37 by entering its serial number,
as printed on the sticker located under the controller.
5 Arturia - User Manual KeyStep 37 - Introduction and Overview