User's Manual
Table Of Contents
- User Manual
- Special Thanks
- Thank you for purchasing the Arturia KeyStep!
- Special Message
- Introduction
- Table Of Contents
- Introduction and Overview
- Basic Operations
- Shift Functions
- Creating Sequences
- The Arpeggiator
- Synchronization
- MOD/GATE/PITCH functions
- Controlling external synths
- The MIDI Control Center
- Software License Agreement
- Declaration of Conformity
4.2.1.3. Legato notes
The process for entering a Legato note is similar:
• Press the Record button
• Hold the Tap button until the end of this example
Caution: the next step will erase the existing sequence.
• Play one or more keys at the same time
• Release all keys to advance the step
• Play another key or chord
• Release the keys to advance to the next step
• When you have reached the end of the legato phrase, release the Tap button.
• Enter more notes as desired, or press the Stop button to exit Record mode.
On a mono synth the process above will result in a 'legato'? response (voltage change
without any gate events between the notes).
Press Play to hear your sequence. A combination of tied notes and legato notes might sound
something like this:
45 Arturia - User Manual KeyStep 37 - Creating Sequences