User`s manual

22 ARTURIA – Analog Lab – USER’S MANUAL
4 ANALOG LAB QUICK START
The following chapter is a quick overview of how to start using Analog Lab immediately.
It does not go into exhaustive detail; the goal here is to help you start enjoying the
sounds as soon as possible. For more a more in-depth description of how Analog Lab
works, please see Chapter 5.
4.1 Audio & MIDI Setup
The first thing to do after launching Analog Lab is to make sure your software is set to
output Audio correctly and that it will receive MIDI from an external keyboard.
4.1.1 Audio setup
In order to check the audio driver settings for Analog Lab, open the Preferences window
by pressing [Command] + [,] on the Mac keyboard or by selecting it from the Analog
Lab drop-down menu (OS X and Windows).
The Preferences menu item on Mac OS X… …and on Windows
This will open the Audio & MIDI Settings window, which is where the preferred audio
output device will be selected. Now click the Test button: If you hear a short sine wave,
then your audio is set up correctly. If not, make sure the correct audio driver is selected
and that your headphones or speakers are properly connected and turned on.