User`s manual

ARTURIA – Analog Laboratory – USER’S MANUAL 37
The following options are available:
RAM Allocation
Low, Normal, Comfortable, No Limit
Screen Height
Small, Medium or Large. You must restart Analog Lab for
this change to take effect.
Drag-and-drop targets
flash
When dragging a Sound to a Part in Multi mode, or when
dragging a Sound or Multi to one of the Program Map
locations in Live mode, this setting determines whether
the target for the selected item will flash or not. Once
you learn what can go where you may not need the
reminder, so you might choose later to set this to Off.
The default setting is On.
5.1.2 Arturia Plug-ins
The Arturia Plug-ins section of the Preferences window indicates whether Analog Lab has
found full versions of Arturia plug-ins installed on your computer (i.e., purchased and
authorized, not the Demo versions).
 The Editable checkbox indicates whether the sounds from the full plug-in can be
edited or not.
 The displayed version is the version of the plug-in that has been loaded (full or
internal).
 Internal: Analog Lab has not found the full version of the plug-in and loaded an
internal version (installed with Analog Lab).
 Found 2.5.3, Require 2.5.4: This denotes that you have an older version of a
plug-in than is required by Analog to work correctly. Update your plug-in and it
will then show up and work.
 Not Authorized: The full version of the plug-in has been found but there is no
license for it in the eLicenser. You must activate this product in order to use it for
editing
Note: A basic level of sound editing capability is always available within Analog Lab.
Authorization allows access to the full editing capability of that instrument.
5.1.3 Audio & MIDI Settings
The Audio & MIDI Settings window is where you can define basic Audio and MIDI
options.