User`s manual

ARTURIA – Analog Laboratory – USER’S MANUAL 67
• You are entitled to prepare a backup copy of the software which will not be used
for purposes other than storage purposes.
• You shall have no further right or interest to use the software other than the
limited rights as specified in this Agreement. Arturia reserves all rights not expressly
granted.
3. Activation of the Software
• Arturia may use a compulsory activation of the software and a compulsory
registration of the OEM software for license control to protect the software against
unlawful copying. If you do not accept the terms and conditions of this Agreement, the
software will not work.
• In such a case the product including the software may only be returned within 30
days following acquisition of the product. Upon return a claim according to § 11 shall not
apply.
4. Support, Upgrades and Updates after Product Registration
• You can only receive support, upgrades and updates following the personal
product registration. Support is provided only for the current version and for the
previous version during one year after publication of the new version. Arturia can modify
and partly or completely adjust the nature of the support (hotline, forum on the website
etc.), upgrades and updates at any time.
• The product registration is possible during the activation process or at any time
later through the Internet. In such a process you are asked to agree to the storage and
use of your personal data (name, address, contact, email-address, and license data) for
the purposes specified above. Arturia may also forward these data to engaged third
parties, in particular distributors, for support purposes and for the verification of the
upgrade or update right.
5. License module (eLicenser Key and/or Soft eLicenser)
• Arturia uses a hardware device connected through the USB connection of a
computer, the “eLicenser dongle” and/or a protection scheme, the “Soft eLicenser” for
license control (hardware and/or virtual dongle). The eLicenser dongle and/or Soft
eLicenser permanently saves the license information and regulates access to the
software. If a eLicenser dongle is required for the use of the software, then the eLicenser
dongle must be connected physically to the computer through the USB interface.
• For the activation of the software, updates or upgrades of the software the
computer which is connected to the Arturia key and/or using the Soft eLicenser or using
the OEM software must be connected to the server of SIA eLicenser through the
Internet. If the product was delivered with the eLicenser dongle, the license information
was already transferred to the eLicenser dongle. If the product was delivered with a
product card (without the eLicenser dongle), the activation codes of the enclosed product
card must be entered manually by the user upon installation and the license information
must be exchanged with the server of SIA eLicenser.
• In the event of OEM software, the activation codes will be sent to an email-
address submitted by you during a registration and must be entered manually by the
user upon installation and the license information must be exchanged with the server of
SIA eLicenser.
• The reinstallation of the software - on the same or another computer - is
permitted only in case the already installed software cannot be used any more (e.g.
following deinstallation). If the software does not use an eLicenser dongle, the new