User`s manual

38 ARTURIA – MiniLab – USER’S MANUAL
6.2 Upgrade firmware
We’ve done our best to provide you with bug-free firmware (the software inside the
keyboard itself)
Should a problem be found later however, you should be able to upgrade it using the
procedure described below.
We strongly advise you to perform such an upgrade only if instructed to by an Arturia
support engineer.
The current firmware revision is automatically displayed at launch time provided the
keyboard is plugged in.
Before attempting this procedure, be sure to have the new firmware file handy.
 Click on the “Upgrade firmware…” button:
 As instructed, unplug the keyboard, then plug it in again while holding the
keyboard shift key, this will enter the firmware upgrade mode
 Locate the file with the new firmware version that you want to load.
 Wait for completion