User`s manual

ARTURIA – MiniLab – USER’S MANUAL 9
2.2.1 Keyboard
MiniLab has a 25-key velocity-sensitive mini-keyboard with a control surface designed
for perfect integration with the Analog Lab software interface.
1: Shift button
Hold Shift and press a Pad to select a Snapshot
Hold Shift, press a key to select the MIDI Channel
2: Pad 1-8 / 9-16 button
Use to access Pad banks 1-8 or 9-16
3: Octave Down / Up buttons
Shift the keyboard range +/- 4 octaves. Press both
buttons at once to reset the range to center.
4: Pitch / Mod Touch strips
Pitch bend and modulation are activated by
pressing the touch strips. “Return to Zero” or
“Hold” settings can be selected for the Pitch strip
using the MIDI Control Center software.
5: Knobs 1 and 9
Analog Lab: Knob 1 controls master volume and
Knob 9 selects presets.
For other software programs use the MIDI Control
Center software to alter these knobs’ assignments.
6: Knobs 2-8 and 10-16
Pre-configured to control various parameters for
each preset in Analog Lab.
For other software programs use the MIDI Control
Center software to alter these knobs’ assignments.
7: Pads 1-8 or 9-16
Use with Analog Lab to recall favorite presets
(Snapshots) or to define and trigger chords.
For other software programs use the MIDI Control
Center software to alter the pads’ assignments.
8: MIDI Channel selector keys
Press the Shift button and then one of the keys to
select the current MIDI channel for MiniLab.