User`s manual

ARTURIA – ANALOG FACTORY - MANUAL
10
2 Installation
2.1 Notes about E-licencer protection and the installation:
The Analog Factory application is delivered with a USB key/E-Licenser. This key
contains your ANALOG FACTORY license and authorizes the software to function. To
use the software on a different machine, simply install the software on that computer
and then plug in the E-Licenser. In this way, you can use this system key to install
licenses of other Arturia products, or other products that use Syncrosoft technology,
and carry the license from computer to computer as you wish.
In order to function correctly, the E-Licencer driver must be already installed on your
system.
The installation program for the Syncrosoft License Control Center is available on CD-
Rom and will be launched automatically when the installation of the Analog Factory is
complete.
You can also download the latest version at this address:
http://syncrosoft.com/downloads/
Once you have installed the driver, an application called <<License Control Center>>
allows you to manage the installed licenses on your key.
On Windows, this application and its documentation are available via the menu
Start-> Programs -> Syncrosoft.
On Macintosh, this application is installed in the Application folder of your system
and the documentation is available from the Help menu of this particular application.
Important Note:
Your license number, and thus the key on which it is installed, represents the true
value of your software. To lose the E-Licenser is to lose the use of the software on
which the licenses are installed. Take special care of this key.
2.2 Windows Installation
 Insert the CD-ROM into the drive. Explore the contents of the CD-ROM and
double click on the icon called <<Analog Factory Setup.exe >>.
 After having accepted the license agreement, you can choose the folder in which
the Analog Factory will be installed