User`s manual

ARTURIA – ANALOG FACTORY S.E. - MANUAL
28
Saving of presets
When the session/project is saved, ANALOG FACTORY S.E. is saved in its last mode of
operation, with all modifications intact. For instance, if you were working on a “P1”
preset in which you have modified parameters, at the next opening of the piece,
ANALOG FACTORY S.E. will load the “P1” preset and the modifications.
The drop-down menu with the VST sequencer allowing you to save a new voice is of
course usable with ANALOG FACTORY S.E.
Automation
The automation works the same with ANALOG FACTORY S.E. as with any VST plug-in
(for more detail about automation, refer to the VST sequencer documentation).
4.4 Audio Unit (Max OSX only)
4.4.1 Installation
The Audio Unit plug-in is automatically installed in the folder reserved for this
purpose, in /Library/Audio/Plug-Ins/Components/
4.4.2 Use in Logic Audio
Select an instrument track. On the slice of the mixer corresponding to the selected
track, click on the button <<I/O>> to obtain the list of plug-ins, then select
<<Stereo -> AU Instruments -> Arturia ANALOG FACTORY
ANALOG FACTORY S.E. opening in Logic
Since version 7, there has been an Audio Unit plug-in manager in Logic. To launch it,
click on the menu <<Preferences -> Start Logic AU Manager>>