User Manual

ARTURIA – ARP 2600 V – USER MANUAL 42
4 THE MODULES
The ARP2600 V can be separated into 3 parts: from top to bottom, the first is a
cabinet dedicated to sound programming and effects, the second concerns
the ARP sequencer and the playing mode configuration interface with the
keyboard and LFO, and finally the third contains the keyboard.
4.1 Sound programming cabinet
4.1.1 Description
The programming section groups all modules which can be used to program
sounds. It is also in this screen where the different patches needed in the
programming of a sound are made.
It is sometimes necessary to connect a module in the programming section to
a module located in the sequencer section.
The sound programming section contains:
 oscillators, which can also be used as modulation sources. (VCO)
 1 multimode filter. (VCF)
 1 amplifier (VCA)
 envelopes dedicated to modulations
 1 noise generator
 1 ring modulator
 1 envelope follower
 1 sample and hold
 2 mixers (on the filter and the VCA)
 1 electronic switch
 A tracking generator module
 mixer / lag module
 2 effects (chorus / delay)