User Manual

ARTURIA – ARP 2600 V – USER MANUAL 51
goes to the inactive state (release of the note), the envelope performs the
“fall” sequence (Release).
ADSR and AR envelopes settings
4.1.4.1 ADSR
Attack (Attack time): Sets the attack time
Decay (Decay time): Sets the decay time
Hold (Sustain Voltage): Sets the level of the hold
Release (Release time): Sets the release time
Output (Output): Envelope output signal
4.1.4.2 AR
Attack (Attack time): Sets the attack time
Release (Release time): Sets the release time
4.1.4.3 Trigger modes
Trigg input (S/H gate): Input connection for an external trigger signal (pre-
cabled to the Sample and Hold clock)
“Gate” output type (Gate): Output connection for a “gate” type signal: for
every note played on the keyboard, the signal remains active as long as the
note is held down.