User Manual

ARTURIA – ARP 2600 V – USER MANUAL 52
“Trigger” output type (trig): Output connection for a “trigger” type signal: each
note played by the keyboard presents a sustain time reduced to the minimum.
Switch “trigger by Sample and Hold clock” (S/H gate): Selection of the choice
of envelope trigger - AR and ADSR – by the keyboard or Sample and Hold
clock. This function reactivates the envelopes at every clock cycle.
4.1.5 Output amplifiers (Voltage Control Amplifier - VCA)
The amplifier is the last step in the conception of a preset. It sets the general
volume of the sound.
The VCA settings
This module is very simple; it contains:
Gain (Initial Gain): Sets the general synthesizer volume
Audio input (Audio VCF / ring mod): Audio input connection jack (pre-cabled
to the filter and ring mod audio outputs).
Modulation inputs (Control): Modulation input connection jacks (pre-cabled
on the AR and ADSR envelopes).
4.1.6 Noise Generator
The noise generator generates white noise or colored noise. It possesses a low
pass filter to dampen high pitched frequencies.