User Manual
Table Of Contents
- User Manual
- MiniLab MkII
- Special Thanks
- Thank you for purchasing the Arturia MiniLab MkII!
- Special Message Section
- Table Of Contents
- Introduction
- Overview
- MiniLab MkII and Analog Lab Lite
- MIDI Control Center
- Software License Agreement
- Declaration of Conformity
2.2. Rear panel
The rear panel of the MiniLab MkII contains several important connectors: the footswitch
jack, a USB Type B jack, and a Kensington lock port.
2.2.1. Footswitch jack
The footswitch jack accepts a momentary footswitch (optional) and allows it to function as
either a momentary switch (such as sustain pedal) or a latching switch (first press/release
sends one event, second press/release sends the next event).
It is best to connect the pedal before supplying power to the MiniLab MkII so it can sense
the pedal’s polarity. Be sure to keep your foot off the pedal when first making the connection
or it could work backward. If this happens, disconnect MiniLab MkII from the power source
and start over.
Note : Please use a pedal cable with ferrite beads.
2.2.2. USB jack
The USB jack allows you to connect your MiniLab MkII to your computer for use with your
favorite DAWs and plug-in instruments.
2.2.3. Kensington lock port
We’ve added a Kensington security lock port to the left side of the rear panel as well. This
will help keep your MiniLab MkII right where you want it.
Rear View
8 Arturia - User Manual MiniLab MkII - Overview