User Manual

ARTURIA – Analog Laboratory – USER’S MANUAL 17
3 AUTHORIZATION
Now that your Analog Laboratory has been installed, you have to authorize the
synthesizer.
The Analog Laboratory uses the “Soft-eLicenser” virtual dongle solution by default.
Avoiding the use of a USB port, this system allows using the synthesizer on one machine
which must be connected to the Internet during the authorization process.
To transfer your license on another computer, or simply use Analog Laboratory on several computers (one
instance at a time), you will need:
* to use one USB-eLicenser hardware dongle (sold separately, also used by many other software editors);
* in the eLicenser Control Center, to drag-and-drop your license from Soft-eLicenser to USB-eLicenser.
This transfer, requiring a valid Internet connection, can be done both ways:
* from Soft-eLicenser to USB-eLicenser;
* from USB-eLicenser to Soft-eLicenser.
Please check the eLicenser documentation installed on your computer for any further technical details.
3.1 Registration
The first step is to register your software in order to obtain the activation code that will
enable you to actually use the software.
You should have handy the license serial number of Analog Laboratory and the unlock
code (these are integral part of the software and are printed on a small plastic card)
Connect your computer to the Internet, and go to this web page:
http://www.arturia.com/login
If you already have an Arturia account
setup, simply log in:
If you don’t have any Arturia account
yet, please create one now:
This will lead you to this form to fill: