User Manual

22 ARTURIA – Analog Laboratory – USER’S MANUAL
4 QUICKSTART GUIDE
The following chapter is a quick overview of how to start using Analog Laboratory
immediately. It does not go into every detail, but rather shows an example of how one
might begin creating sound rapidly and easily with this software. For more detailed
information and more in depth descriptions of how Analog Laboratory works, please see
Chapter 5.
4.1 Audio & MIDI Setup
Before getting into any fun sound making, the first and most important thing to check,
once you have opened Analog Laboratory, is that your software is set to output Audio
correctly and receive MIDI from an external keyboard.
4.1.1 Audio setup
In order to make sure your Analog Laboratory Software is set to send audio out the
correct audio driver. To check this, open the Audio & MIDI Settings window from the
Setup drop-down menu.
The Audio & MIDI Settings menu item, on Mac OS X …same on Windows
Select your preferred audio output driver, then click the Test Tone button. You should
hear a short sine wave. If so, then your audio is correctly setup. If not, then make sure
the correct audio driver is selected and that your headphones or speakers are correctly
connected and turned on.