User Manual

ARTURIA – Analog Laboratory – USER’S MANUAL 31
The Upper button clicked
Once “Upper” is selected, we can be sure that the knobs in the Controls section and
faders in the Envelope section are set to control the Upper Part.
We decided that we'd like to change the length of our notes in the Upper part. In order
to do that, we need to increase the Decay amount of the amplitude envelope, or
“Decay1” (second fader from the left). Now when a note is pressed it should ring after
we let it go, and should look like this:
The first envelope is set
For complete information on how each of these Control and Envelope parameters can
affect the sound of your preset, please see chapter 5.4.
4.3.3 Modifying the Melody and Pads of a Scene Preset
In addition to just modifying the sounds of the presets, we can also change quite a few
aspects of the Pads and Melodies. We are not going to go into every detail here (please
see Chapter 5 for that), but we will look at how to modify one or two aspects of this
“Electro_4A” preset.
Let’s say we want to change a few things:
• Move the Melody to the Lower part (to play lead or solos on the Upper Sound)
• Transpose the Bass (Lower Sound) up one octave
• Select a different Sound for the Upper part
In order to operate any of these functions, we must first toggle into the Scene mode's
Edit mode by hitting the “Edit” button in the lower right-hand corner of the Scene search
screen:
Edit button (underneath the Preset list)