User Manual

36 ARTURIA – Analog Laboratory – USER’S MANUAL
KNOB DATA MODE Here you can choose the data transmission mode of the
encoders:
 ABS is absolute mode, the controller sends the exact
value of the parameter;
 REL1 is usual relative mode, the controller sends
increment and decrement information, as well as
acceleration;
 REL2 is binary offset mode (two’s complement), a
special encoding used by some MIDI controllers.
Default is ABS.
SHOW ANIMATION Choose to activate or deactivate the animation (keyboard
and Preset Manager folding).
SHOW CONTROL POPUP
WHEN MOUSE
CLICKS ON CONTROL
A small popup window appears each time that the mouse
clicks on a modifiable parameter in order to give
information about the parameter and modifiable values.
Choose ON to activate this preference, or OFF to
deactivate it. Default is ON.
SHOW CONTROL POPUP
WHEN MOUSE
RESTS ON CONTROL
A popup window will appear when the mouse remains
idle on a modifiable parameter, giving information about
the parameter and the modifiable values. Choose ON to
activate this preference, or OFF to deactivate it. Default
is ON.
SHOW ASSIGNATION
LCDS
Toggles the display of the small label screens showing
the current key parameter knob assignments.
ENABLE FULL PLUGINS IF
PRESENT
Enables editing of an Analog Laboratory preset in the full
Arturia synthesizer the preset originally came from, if the
full version is owned and fully active on the same
computer (therefore marked as “detected”).
Turn this ON in order to use the “Open” function in the
Sound Search screen.
5.1.2 Audio & MIDI Settings
The Audio & MIDI Settings window is where you can define basic Audio and MIDI
options.