User Manual

ARTURIA – Analog Laboratory – USER’S MANUAL 47
The Kbd buttons on the left, and Controls section on the right
If “Upper” is selected in the Kbd section, then all of the rotary controls in the Controls
section will affect the Upper sound of the Scene. If “Lower” is selected, then the knobs in
the Controls section will correspond to the Lower sound of the Scene.
5.4.4 Filter
Filter
CUTOFF Modifies the cut-off frequency: this filter has the ability to make the
sound more or less bright by controlling the amount of high
frequencies.
RESO Modifies the resonance of the filter: the sound becomes more
“cutting” when the parameter is pushed.
5.4.5 LFO
The LFO, Low Frequency Oscillator, is used as a modulation source for Analog
Laboratory’s sound. It allows the user to create variations in a sound parameter to
generate diverse effects such as a vibrato, “wahwah” effect, etc. The two parameters
that may be modulated within the LFO are:
LFO
RATE Sets the LFO rate/speed.
AMOUNT Sets the amount of LFO modulation.
5.4.6 Key parameters
The key parameters section will prove to be particularly useful. This section is found in
the middle of the Keyboard View and labeled with the aforementioned name (Key
Parameters).