User Manual

ARTURIA – Analog Laboratory – USER’S MANUAL 59
Tempo fader
5.5.11 Mixer
The final bottom portion of the Scene Edit Screen is the Mixer section. This
straightforward yet essential portion of Analog Laboratory allows one to adjust volume
and panning for every sonic component in the Scene:
• 2 Sounds (Upper and Lower)
• 4 Pads
There are therefore 6 channels in this mixer, each with level and pan. Using the mixer is
key in order to get a professional sounding balance between the 6 elements of the
Scene, and make it ready for the stage or the studio.
The Scene Edit screen contains 6 faders that control the volumes of the 6 sonic elements
in a Scene: Upper Sound, Lower Sound, Pad1, Pad2, Pad3 and Pad4.
The Mixer section of the Scene Details screen
By clicking the pencil icon on the right hand side of this Mixer screen, one can access
more in depth Mixing functions in the Mixer Setup Screen:
Mixer Setup screen
In the Mixer Setup screen there are individual knobs for Pan and Volume, for each of the
6 sound sources of the Scene. These should be used to create a balance between the
sounds. The “Load” button validates and stores any changes made, “Back” will restore
the settings as they were before the screen was opened. Both options close the Mixer
Setup Screen and return to the initial Scene Edit view.