User Manual

70 ARTURIA – Analog Laboratory – USER’S MANUAL
7.1.3 Octave buttons
Pushing the minus or plus button makes the software transpose up to three octaves up
or down to set the preferred octave section.
Seven states of leds will help you to visually locate the current octave setting:
• Octave -3 : led- blinks at speed 3, led+ does not blink
• Octave -2 : led- blinks at speed 2, led+ does not blink
• Octave -1 : led- blinks at speed 1, led+ does not blink
• Octave 0 : led– and led+ do not blink
• Octave +1 : led+ blinks at speed 1, led- does not blink
• Octave +2 : led+ blinks at speed 2, led- does not blink
• Octave +3 : led+ blinks at speed 3, led- does not blink
Octave buttons
7.1.4 Level rotary encoder
The “Level” rotary encoder sets the general volume of Analog Laboratory.
The Level encoder
7.1.5 Search/MIDI section
The Search/MIDI section
7.1.5.1 Sound and Scene buttons
The Sound and Scene buttons allow toggling between both modes in Analog Laboratory.
7.1.5.2 Setup button
The Setup button can set the Analog Laboratory keyboard in setup mode. When the
button is pushed it will call a secondary function you cannot get in the initial mode. This
button lights up when the Setup mode is activated.
When the Setup mode is activated, the interface changes as follow: