User Manual

72 ARTURIA – Analog Laboratory – USER’S MANUAL
Num MIDI number for a specific item:
• For a pad or button in note mode, contains the actual note number.
• For the transport buttons in MMC mode, contains the MMC command
number.
• For a knob or fader in NRPN/RPN mode, contains the actual controller
number used for data transmission (6 or 38).
• For a button in Prog mode, holds the program change number.
Min LSB Various functions depending on the controller:
• For a knob, pad or fader in Ctrl mode, contains the minimum value
sent.
• For a knob or fader in NRPN/RPN mode, contains the NRPN/RPN
controller number LSB (Less Significant Byte).
• For a button in Ctl mode, holds the value sent at release time.
• For a button in Prog mode, holds the bank LSB.
• For a button in Note mode, holds note off velocity.
Max MSB Various functions depending on the controller:
• For a knob, pad or fader in Ctrl mode, contains the maximum value
sent.
• For a knob or fader in NRPN/RPN mode, contains the NRPN/RPN
controller number MSB (Most Significant Byte).
• For a button in Ctl mode, holds the value sent at press time.
• For a button in Prog mode, holds the bank MSB.
• For a button in Note mode, holds note on velocity.
It’s perfectly legal for Min to be greater than Max, in that case the controller is effectively
inverted.
Global Used to set the global parameters:
• FaderMod: fader draw bar mode, Normal or Drawbar.
• KnobMode: knob mode, Absolute or Relative.
• OctTrans: octave transposition, from -3 to +3 octaves.
• ChroTrns: chromatic transposition, from -12 to +12 semitones.
• LowerCh: lower MIDI Channel, from 1 to 16.
• UpperCh: upper MIDI Channel, from 1 to 16.
• SplitMod: split mode, On or Off.
• SplitPnt: split point, from C-2 to G8.
• MMCDevID: MMC device ID, from 0 to 127.
• DeviceID: this device ID, from 16 to 127.
When editing the split point, hitting a key on the music keyboard should set the split point
accordingly (without preventing this strike to have the usual effect).