User Manual

ARTURIA – Analog Laboratory – USER’S MANUAL 73
Curve Used to set the global curves, the following settings are available:
• Velocity: the Velocity curve, from 0 to 10
• Aftertch: the Aftertouch curve, from 0 to 10
• PadVeloc: the Pad velocity curve, from 0 to 10
• KnobAccl: the Knob acceleration, from 0 to 10
• KeyATmin: the Minimum Key aftertouch, from 0 to 127
• KeyATMax: the Maximum Key aftertouch, from 0 to 127
• PadATmin: the Minimum Pad aftertouch, from 0 to 127
• PadATMax: the Maximum Pad aftertouch, from 0 to 127
Recall Recall the keyboard settings from memory or to reset to default settings.
Store Store the keyboard settings into memory.
MIDI Allows sending an immediate MIDI message. In this mode a MIDI message
is selected using the encoders, and sent right away when the Value encoder
is pushed. The available messages are as follow:
• Program: Program Change, from 1 to 128.
• Bank MSB: the bank most significant byte, from 0 to 127.
• Bank LSB: the bank less significant byte, from 0 to 127.
• Reset: resets GM1, GM2, GS, XG and All notes off.
The Snapshots buttons
7.1.7 Sequencer section
The Analog Laboratory keyboard embeds standard sequencer transport functions, which
allow controlling any external hardware or software sequencer.
Buttons send standard MMC messages: Start, Stop, Record, Backward, Forward and
Loop.